Super Constructa Flexible Foam
About The Stands up to repeated use. To strenghten bond, warm adhesive backing with a heat gun before applying to the surface. Super Constructa Foam is a smooth blue material available in sheets only. Use a heat gun to thoroughly warm both surfaces
Padding Pressure-sensitive paddings bond easily to these materials. If either surface is allowed to cool before bonding is complete, the bond will be weak. To strenghten bond, warm adhesive backing with a heat gun before applying to the surface. Use a heat gun to thoroughly warm both surfaces. Compressive strength, 25% def: 5-8 psi. Super Constructa Foam is a smooth blue material available in sheets only. Hold the gun 4" to 6" away from the material and pass the heat back and forth until the surfaces appear glassy. They will provide extra protection for fragile skin. Super Constructa Foam let you custom fabricate wheelchair and bed support systems. Less stiff than Constructa Foam with a velvety closed-cell surface. Follow the adhesive manufacturer's directions. Adhesives are more effective on larger surfaces. In this case, only the adhesive surface should be warmed. Bonding Constructa Foam bonds after application of direct heat. Specifications: Density: 2 lbs/cu.ft. Stands up to repeated use. Apply weight and cure for 24 hours before use to ensure total contact. Heat one minute longer, then press the surfaces together. Both foams can be bonded with 3M Spray 90 Adhesive. Cut Super Constructa Foam with a fine blade or a knife with a razor blade. Molestick™, Soft Sponge™ and Plastazote® are often used for wheelchair adaptations. Create trunk and head supports, body positioners, abduction wedges, as well as leg and arm troughs using these lightweight closed-cell foam materials. Compressive strength, 75% def: 14-18 psi (50%).
configurable
Super Constructa Flexible Foam
configurable
Specifications of Super Constructa Flexible Foam | |
|---|---|
| Category | Home & Garden > Linens & Bedding > Bedding > Pillows |
| Instock | instock |
